Emaux’s EcoWave TITAN and E-Power TITAN variable speed pumps pair a drive system with an intelligent control module.
Two ranges of filtration pumps, 4 power ratings
Both ranges use an IE5 permanent magnet motor and an optimised fluid path. The manufacturer reports an overall energy consumption reduction of over 30 % and a noise level of 46 dB. Both pumps are powered by a newly developed motor, with an efficiency of up to 95 %.
They differ only in pump body design, both in fibreglass-reinforced ABS but with different lines, and horsepower ratings : EcoWave has 2 models rated at 1.25 and 1.65 hp, and E-Power has 2 models rated at 2 and 3 hp.

Emaux EcoWave TITAN pump
Their housing is rated IP55 and is described as resistant to dust, moisture, and salt spray. Protection features are also built into the control module.
Their control panel has a large LCD touchscreen. One tap switches the display between speed, flow rate, and power consumption. In sleep mode, the controller powers down to extend component life, and an infrared sensor wakes it without touch.
An IoT version connects to the Smart Life app. Operators can monitor and adjust the pump remotely and set automated schedules.
A transparent protective shell covers the controller and shields it from moisture, UV radiation, and dust. On the pump body, a transparent lid allows quick inspection, and a ring lock simplifies maintenance.
Both ranges are designed as retrofit replacements aligned with existing plumbing positions.


