IntelliPool system is designed to run 24h/day with IntelliFlo® to increase power savings due to low speed; low dosing capacity combined with low pump speed and 24h operation, cause better mixing of water and chemicals, better constant reading through the probes of the water chemistry and lower usage of the chemicals. This process is further optimized with the new peristaltic pump.

 

pompe

 

Pump is supplied with a suction plunger with level sensor that informs IntelliPool® when the chemical canister is almost empty, causing IntelliPool® to give an alarm.

piston d'aspiration


Components included with the Pentair Peristaltic Dosing Pump :

 

  • Dosing pump;

 

  • 45cm suction plunger with level sensor incl. 2.5m cable to connect to IntelliPool® and suction tube to bring chemicals from the canister to the peristaltic pump;

 

  • injection valve for installation on the PVC piping and 2m injection tubing to supply chemicals from the peristaltic pump to the PVC piping;

 

  • wall mounting bracket to install pump in the technical room;

 

  • stickers for marking pump with pH+, pH- or Cl, so pool owner knows what chemical the peristaltic pump is set up for;

 

  • spare membrane hose, which is the small tube inside the peristaltic pump. Extra service to customer, as this tube needs to be replaced each 12 to 24 months.